January 20, 2021
On the firewall there is a little plate that has to be fabricated which is the aux fuel pump dubbler plate. The plans clearly state that the flush side of the rivets should be AFT. I did a real good job of ignoring this little note and now I get to do it again. I really should pay more attention to the drawings.
I also left off the platenuts because the drawings didn't lay them out exactly and I would rather drill them to match the pump anyway. I may regret this later because I don't know how hard they are going to be to get to.
This web site and the infomation contained within it are for entertainment purposes only. The opinions expressed on construction techniques are my opinions only and should not be confused with proper construction techniques. There is undoubtedly more than one way to build an airplane and some methods that I use may or may not work in any given circumstance. If there is any question please call the kit manufacturer. I love to help but I am not responsible for the misuse of any information contained on this web site.