Project - Notes

Home  Project News  February 3, 2021  Project Log  FAQ  Project Notes  Project Summary  Guestbook  Other Stuff

Shoulder Harness Anchor Screw Up I messed up and located my shoulder harness anchors one bulkhead too far forward. I didn't notice this until I had already riveted on the top skins of the fuselage. I emailed Van's support and they told me to make a piece of 1/8" plate with the proper hole pattern to bolt to the Longeron where the wrong holes are and then to simply move the shoulder harness anchors back to the proper place. Disclaimer: This web site and the infomation contained within it are for entertainment purposes only. The opinions expressed on construction techniques are my opinions only and should not be confused with proper construction techniques. There is undoubtedly more than one way to build an airplane and some methods that I use may or may not work in any given circumstance. If there is any question please call the kit manufacturer. I love to help but I am not responsible for the misuse of any information contained on this web site.

 February 3, 2021
 Email
 Home